CLEAPSS BEAM

Connected • BLE

Live Readout

Temperature

--.- °C

Session Time

00:00:00

Readings

0

Sampling Rate

1.0 Hz

💡 Light Control

Colour

Quick presets

R255

G255

B255

🔆 Brightness 50%

(firmware caps absolute output at 25% to protect the 3V3 rail)

Light Gate Setup

Single IR gate with a double-interrupt card. Enter the card geometry below — the firmware streams raw beam edges and all speeds & acceleration are computed here, so you can change the card without re-flashing.

Flag width (mm)

Leading-edge gap (mm)

Gap = distance between the leading edges of the two flags. Used to find acceleration between the two velocity measurements.

Speed at flag 1

--.-- m/s

Speed at flag 2

--.-- m/s

Acceleration

--.-- m/s²

Beam state

—

0 edges captured

Pass Results

0 passes

#	t1 block (ms)	v1 (m/s)	t2 block (ms)	v2 (m/s)	Δt edges (ms)	a (m/s²)

🌦️ Environmental Monitor

Temperature

--.- °C

Humidity

-- %RH

Pressure

---- hPa

Dew Point

--.- °C

derived (Magnus)

Live Graph

Data Log

0 rows

#	Time (ms)	Temp (°C)	RH (%)	Pressure (hPa)

Experiment Session

Name:

Rate:

Live Graph

Data Log

0 rows

#	Timestamp (ms)	Absolute Time	Temperature (°C)

Console